Important Safety Tips: Avoid fraud by meeting all sellers in-person to pay for items. Never send or wire money to people you do not know or trust. eBay Classifieds does not offer any transaction or payment services. Stay safe - read our safety tips.
2003 Cannondale X440
Factory Equipped With Components By
Ohlins, D.I.D., Talon, FMF, Acerbis
The X440 Is The Motocross Model
Different Fuel Map, Different Fork Internals, Different Shock Internals
With Both High AND Low Speed Compression Adjustments. 19" Rear Wheel
Single Cylinder, Fuel Injected, Water Cooled 440CC, Twin-Port Engine
Magura Hydraulic Clutch, Electric Start.
Head Is Oriented Backwards Like The New Yamaha
Motocross Bikes, With Front Intake, And Rear Exit Exhaust.
Programmable Electronic Fuel Injection
Twin Spar All Aluminum Frame, Removable Aluminum Rear Subframe
Talon Drilled Lightweight Hubs, D.I.D. Rims, Stainless Steel Spokes
46mm Ohlins Inverted Forks With Compression And Rebound Adjustments
Ohlins Shock With Rebound, And High/Low Speed Compression Adjustments
The Complete Bike Was Stripped Down To The Bare Frame, Every Nut And Bolt.
Two Years, $5000 Invested And At Least 150 Hours, It Is Done.
• Updated Crank, Balanced, New Main Bearings
• Low Hour ATK 450 Cylinder Head And Cams, Seats Cut
• All New OEM Stainless Cannondale Intake And Exhaust Valves, Valve Springs, Keepers
• New OEM Cannondale Piston, Pin And Rings, And Dimple-Less Sleeve
• New OEM Cannondale Timing Chain, Upper And Lower Timing Gears
• New OEM Cannondale Timing Chain Guides
• Updated Oil Pump Housing To Fix Oil Drain-Back Issues
• Aluminum Oil Pump Gears Instead Of Plastic
• New Needle-Bearing Clutch Basket Instead Of Sleeved Style, And New Primary Gear
• New Clutch Hub, Pressure Plate, OEM Metal And Friction Discs, And Clutch Springs
• New Transmission And Engine Oil Filter Screens
• New Main And Countershaft Bearings
• New Aluminum Valve Cover Instead Of OEM Magnesium Which Corrodes
• New Aluminum Water Pump Impeller Instead Of Original Plastic
• New OEM Cannondale Folding Aluminum Shift Lever
• New OEM Cannondale Electric Starter Assembly
• New OEM Cannondale Ignition Coil
• All New OEM Fuel Injection Hoses
• All New OEM Seals And Gaskets
• New External Magnetic Oil Strainer
• New Fuel Filler
• OEM Cannondale Full FMF Exhaust System
• Forks New Serviced By Race-Tech
• Shock New Serviced By Race Tech
• New 100N/mm Ohlins Shock Spring
• New OEM Upper And Lower Steering Stem Bearings
• New OEM Front And Rear Wheel Bearings And Seals
• New OEM Swingarm Bearings, (Complete Set With Thrust Brgs. Etc. . .)
• New OEM Footpegs, Footpeg Mounts, Pins And Springs
• New OEM Upper And Lower Shock Bushings
• New OEM Upper And Lower Chain Rollers
• New OEM Swigarm Chain Buffer
• New OEM Rear Chain Guide And Aluminum Shell
• New OEM Drilled Swingarm Bolt
• New OEM Subframe And Motor Mount Fasteners, 99% All New Other Fasteners
• New Seat Latch Plate And Fasteners
• New OEM Front And Rear Fenders, Side Panels, Front Number Plate, Radiator Shrouds, Fork Guards And Rear Mud Guard
• New OEM Decals (Complete All Decals Including Suspension)
• New OEM Gripper Seat
• New Battery Tray
• New Main Relay
• New Domino Integrated On/Off-Starter Switch
• New OEM Radiator, Cap And Hoses, Mounts And Guard
• New Radiator Overflow Bottle Setup
• New Rear Talon Brand (OEM) Rear Sprocket With New OEM Bolts & Nuts
• New Front Talon Brand (OEM) Front Sprocket
• New RK GB520EXW Gold XW-Ring Chain
• Swingarm Has New Time-Serts Repair With New Rear Chain Adjusters. (OEM Improvement)
• New OEM Domino Handlebars With New Renthal Bar Pads
• New Acerbis Silver/Black Hand Guards
• New OEM Throttle Assembly With Dust Cover
• New OEM Throttle Cable
• New Galfer (OEM) Braided Stainless Rear Brake Line
• Galfer Honda Braided Stainless Front Brake Line
• New OEM Swingarm Brake Line Guides
• New OEM Front Brake Caliper
• New OEM Front Brake Master Cylinder Complete Including Lever
• New Galfer 260MM Oversize Front Brake Rotor W/New Rotor Bolts
• New Wave Rear Rotor With New Rotor Bolts
• New OEM Front And Rear Disc Brake Pads
• New Magura Clutch Master And Slave Cylinder Rebuild Kits, New Magura Clutch Lever
• New OEM Rear Master Cylinder And Caliper Rebuild Kits, New OEM Caliper Pins
• New True-Gel Battery, Leak Proof/Spill Proof
• New Front And Rear IRC Tubes
• New Motion Pro Lightweight Composite Rim Locks, Honda Valve Stem Dirt Seals
• Low Hour ATK450 Fuel Tank Assy. With New Internal Hoses And Filter, Upgraded Fuel Tank Connections With New Petcocks And Quick Disconnects
• New Fuel Filler Cap And Vent Hose
• New No-Toil Air Filter, New Airbox Funnel
• OEM Aluminum Engine Skid Plate
Has Brand New TrailTech "Striker" Computer With Aluminum Vibration-Proof Mount.
Has Red Anodized Aluminum In-Line Water Temperature Sending Unit. Still Has The
Protective Film On It, 11.8 Miles Showing.
Has Dunlop D756 Intermediate terrain front and rear tires in good condition that came off of
my son's CRF450R Motocross bike. As I planned on keeping the bike, I took his tires which
were lightly used and gave him the brand new ones. "Felt he could use the newest tires more
Don't think I've forgotten anything. Bike has been broken in and ridden for maybe 20 minutes.
Have a new "float" charger for the bike. Also have included Compaq laptop which has OEM Cannondale software and cable so you can check faults, set throttle stops, change fuel injection maps. Also has all chassis parts, engine parts, diagnostic, repair and owner manuals. Have all the original take-off parts including 115N/mm Ohlins shock spring for heavier riders. Also Have Good Extra Crankshaft Assembly.
Also included is a brand new, in-the-package, never used Kent-Moore basic injection testing tool.
Have Brand New Red-Trim Seat And Matching Plastics, And Silver/Black Trim Seat And Matching Plastics. Have 2 extra new NGK spark plugs, extra brand new throttle assembly. New OEM Grip Set. Two (2) new OEM Magura front brake levers. New OEM folding aluminum shift lever. New OEM clutch kit, (Metal and Fiber Plates, Springs). New Magura clutch slave cylinder with new braided stainless hose. New airbox funnel. New complete front and rear spokes and nipples set. Extra new spokes and nipples, (might be a complete set). New front chain slider (swingarm buffer). New rear chain guide. New extra "fuel Injection" decals set. New engine oil screen. 2 extra new engine oil filters. Used Stainless Steel reuseable engine oil filter with seals. Rebuilt front brake master cylinder. Miscellaneous new frame fasteners and engine o-rings.
Also have, and is included brand new OEM front number plate with headlight, and rear fender
attachment with tail-light. Extra front and rear complete wheel assemblies if you wanted to mount
dual purpose tires for a quick swap-out for street use. Comes With Bike Stand.
It's a brand new machine. Easy to ride, extremely powerful.
You don't need to buy or do anything at all,
load the bike up and head to the trails.